Featured post

When out fossil hunting...

So I thought I would do a post about things to remember when out and about doing your own fossil hunts, hopefully you'll find it helpfu...

Showing posts with label vertebrae. Show all posts
Showing posts with label vertebrae. Show all posts

Thursday, 31 May 2018

Ichthyosaur Preparation Diary #1

BEFORE: The underside is the side
 that I will be preparing from, 
far too much rock
for a small drill to get through.
The first major work that needed doing to the Ichthyosaur was that it needed cutting down to size. The blocks were very thick and very heavy. Plus, I plan on mechanically preparing the bones by going from what looks to be the bottom. This is because the bones are exposed on the top surface, great for spotting them in the field, not so good for their preservation. Some of the vertebrae in the long block are badly worn but going from the other side will reveal them at their best.

The round block was easy enough to split. The stratification was completely parallel to the bedding surface and split like a dream. On the underside, there are another three rather large vertebrae waiting to be revealed.

AFTER: The thickness of the rock has been greatly reduced,
making it easier for the drill to get to the better preserved side
of the bones.
The long block didn't want to play as nicely. The position of some of the bones had created cylindrical structures which split vertically rather than horizontally. Unfortunately, it broke into three pieces, not beyond repair but something that would have been better avoided.

Next step was gluing the off cuts, and now broken pieces back onto the main blocks so that the bones were complete when they are prepared out. Again the round block went back together with little to no fuss. One piece was guided in by a handy belemnite that had broken in two and stuck to either piece of shale. The long block was proving difficult again. The larger of the broken pieces was thicker than the main block and so the other end is being propped up to stop it snapping again. The rest was repaired with no problem, another three vertebrae added to this block with numerous ribs completed.


Block 1 after the repairs. The glued piece at
bottom of the picture is the large broken piece.
The glued slab on the right of the block has
three more vertebrae in it and numerous ribs, it
also completes a number of vertebrae along the
glued line.
Block 2 much more neatly glued and split with
the three large vertebrae revealed in the centre.
There is also potentially a fourth near the
tape measure but we will have to wait and see.

























BEFORE: The small odd piece that doesn't fit
anywhere
But there is one piece that just does not fit anywhere. A shame but in this small piece of shale there are two vertebrae, at different angles. One appears to be squashed anterio-ventrally and the other is half complete. But once prepared it'll make a nice display piece.

Although the epoxy glue looks unsightly, I have smeared it onto the side that will be face down when it comes to preparation so this will not be seen.





AFTER: The small odd piece after splitting, this brings
the bone closer to the surface. The first vertebra is
clearly seen in cross section here.











The second vertebra is harder to see, it is in the centre of
the rock in side view, the lip around the centrum is rather
prominent.





















Dotternhausen and the Posidonia Schieffer

While on my third year residential fieldtrip to Southern Germany we visited to early Jurassic strata known as the Posidonia schieffer (shale). The rock here is somewhat akin to the Blue Lias of Lyme Regis and Charmouth, however the rock here is much more uniform and does not feature Milankovitch Cycles. This particular outcrop was in a quarry just outside Dotternhausen.

Everyone hard at work counting ammonites, you can see the
enthusiasm in the picture.
The shale was deposited under anoxic marine conditions, the sea floor would have been a soupy mud that supported no benthic fauna. This is perfect for exceptional preservation. Ammonites, crinoids, ichthyosaurs, pterosaurs, sharks and fish all would fall into this mud and sink. Due to the lack of oxygen aerobic bacteria would not be present and therefore decay would be inhibited. This leads to the preservation and discovery of fossil logs with crinoids attached and ichthyosaurs with skin outlines and embryos in the womb, just to name some examples.

The morning was spent at the Werkforum Museum at the cement works in Dotternhausen. Here we got a brief background to the fossils found in the quarry and what the environment would have been like 185 Ma.

So while visiting the Dotternhausen Quarry it was to be expected that as a cohort of 20 students we should find something between us.

Dactylioceras in one of many sheets of split shale.
Phylloceras from yet another sheet of shale.




















Our first task was to collect and tabulate the number of ammonites with epibionts living on them. Myself and three of my close colleagues set to work splitting shale "sheets" and counting every ammonite in sight. Here I had my first find, a beautifully preserved fish fin, encircled by the disarticulated 'horseshore' structure of a Lytoceras ammonite.

The well preserved fish fin with the Lytoceras horseshoe
in the top of the picture.
I would have been happy to come away from the entire field trip with just this one find. But a few layers down, I come across a very small bone, about a centimetre or so in diameter. What we know is this is an Ichthyosaur vertebra. What we believe is that it is a tail vertebra of a juvenile because of how small it is. Unfortunately this was an isolated bone. Fortunately, it doesn't need any mechanical preparation as it is already well presented on the slab of shale it came from. Already I have had more success here in an hour than I have in three years of fossil hunting across numerous sites on the south coast of England.
The small tail vertebra from the ammonite exercise.
The small Ichthyosaur vertebra, in need of a
little treatment to protect it.





















An hour or two after we arrived to the quarry we had all just about finished the exercise, and not a moment too soon with the day only getting hotter and hotter! And so, true to form with this class, we enthusiastically scrabbled over freshly blasted rock from the quarry wall in search of the fossils we had seen in the museum that morning.

I chose to split larger blocks bit by bit in the hope that there would be a bone or two preserved inside. A few blocks in, I start on one particular piece and put it on its side and begin hammering. It split a little too easy and at an odd angle, revealing a line of bones in the piece that had come away. Turning it over, I found that there was a line of vertebrae, criss-crossed by slender ribs. This was a disarticulated Ichthyosaur. Just on this block there was around 15 vertebrae. Definitely not complete but certainly exciting to find! It took three of us to move this block out so that the rest of the class could see what had been found.

The first block to be found in the quarry, with
some of the offcuts to the right.
The two main blocks and offcuts that we
managed to find and bring back to the
UK for preparation.























Meanwhile, the search continued for the rest of the animal. After shifting some rock, another block with a single vertebra and some definition of ribs was found. Still not complete but unfortunately there was no more of the Ichthyosaur to find. At first, I thought that the museum, or at least the cement works, would want this find for themselves. Some quarry owners in the UK confiscate fossils and sell them as profit, I assumed this was the same here. But, I was told that I would be allowed to keep them and bring them back to the UK to prepare the bones myself.

Side view of one offcut that thankfully fits back onto the
rounded block quite nicely
The two blocks are jam packed with bones, still not complete unfortunately. I believe that the centre of the skeleton is preserved, the tail and head unfortunately missing, possibly eaten by a much larger Ichthyosaur.

There's always one piece left over, no idea how this fits onto
either block. But it'll still make a nice addition to my collection.
I spoke to Professor Dave Martill about why the bones are scattered in the block as opposed to being articulated like the specimens we have seen before. He said that this is probably due to the final resting position of the animal in the Jurassic. It may well have come to rest on its ventral side and not be completely buried in the sediment, therefore decay would have taken place. Therefore you know have vertebrae that are elevated above the sediment and becoming loose due to the decay process. They will begin to fall out and land on the sediment in seemingly more random orientations. The same is true for the ribs.

The local museum has very kindly allowed me to use their equipment to prepare this find. Work will begin on the 27th June. I plan to upload nightly on the progress of the day even if it is just a photograph of what has been revealed so far. Needless to say, I'm very excited!